10. Technical Specifications
Frequency response (1) +/- 3dB 36Hz - 175Hz
Recommended Amplifier Power 300 - 600 watt / 8 ohm
Power Handling Average(2) Programme Peak (10ms)
300 watt 600 watt 1200 watt
Sensitivity (1)
2.83 volt @ 1m 96 dB
99 dB (half space conditions)
Maximum SPL (3) Average Peak
@ 1m 124 dB 130 dB
Impedance Nominal 8.0 ohm
Minimum 6.7 ohm
Distortion
0.1 Full Power 2nd Harmonic 3rd Harmonic
50 Hz 0.22% 0.71%
100 Hz 0.56% 0.31%
0.01 Full Power 2nd Harmonic 3rd Harmonic
50 Hz 0.21% 0.31%
100 Hz 0.25% 0.18%
Driver Complement 1 x 15” (381mm) LF Driver
Type number 3803
Recommended Crossover Point 100Hz - 175Hz, 24dB/octave, Linkwitz - Riley
100Hz if used with T12, i12 or i15
Enclosure 100 litre vented, 15mm birch plywood
Finish Textured black\grey paint
Connectors 2 x Speakon NL4MPR IN/OUT
Fittings 2 x Recessed carrying handles
1 x 35mm pole mounting socket
4 x Rubber feet
Dimensions 665mm(H) x 440mm(W) x 435mm(D)
26.18ins(H) x 17.32ins(W) x 17.12ins(D)
Weight 27 Kg (59.4 lbs)
NOTES: (1) Average over stated bandwidth. Measured at 1m on axis, in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in half space conditions.
Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
To Next Page
Loading...
