Do you have a question about the Tannoy PS350 and is the answer not in the manual?
Background on stereo audio format and its historical significance in music production.
Details LCR inputs, balanced XLR/RCA, and tip/sleeve wiring for PS350/PS350B.
Describes fixed high pass filter and full frequency bypass for LCR outputs.
Covers power switch, fuse replacement, and safe AC power connection procedures.
Details LFE input selection and LCR variable crossover adjustment.
Explains bypass and dual sub switches for PS350B configuration.
Details the LFE crossover mode selection for 'all pass' or 'low pass' filter.
Describes the main volume control for the subwoofer's output level.
Explains how to adjust phase for optimal bass response alignment.
Explains using subwoofer outputs to main amp inputs for internal filtering.
Explains connecting directly from source to subwoofer for main speakers.
Details connecting a single subwoofer with a powered receiver.
Explains connecting one subwoofer with preamp/amp without bass management.
Details PS350B with preamp/amp using bass management.
Explains connecting two subwoofers with preamp/amp without bass management.
Details connecting two PS350Bs with preamp/amp using bass management.
Explains stereo setup with one subwoofer using internal filtering.
Details stereo setup with two subwoofers using internal filtering.
Guides on diagnosing and resolving no sound, no audio output, LFE only, and distorted sound.