Tannoy TS Sub - Technical Specifications

SUB
TECHNICAL SPECIFICATION
TS801 TS1001 TS1201
Output Power 200W RMS 300W RMS 500W RMS
Low Frequency Response (-6dB) 29Hz 24Hz 21Hz
(TypicalInRoom)
Inputs 2 x Phono Line Level, 2 x Speaker Level
Input Filter 50-150Hz, 2nd Order Low Pass, with LFE Provision
Auto Mute After Approximately 15 mins in Absence of Input Signal
Driver Type 200mm(8”) 250mm(10”) 300mm(12”)
Enclosure Type Closed Box, Forward Firing
Enclosure Volume 16litre(0.57cu.ft.) 23litre(0.81cu.ft.) 32litre(1.13cu.ft.)
Additional Features Mode Presets: Audio, Video, Night
Variable Phase Control, 0-180 degrees
Shelf Filter +/- 6dB Range, Lower Limit 35Hz
 ParametricEqualiser(PEQ).+/-6bBRange,20-100Hz,
  WideSetting(Q=6),Normal(Q=3.5),Narrow(Q=2)
  InfraRed(IR)ReceiverFunctionality
Enclosure Dimensions, (W x H x D) 300 x 300 x 280mm 340 x 340 x 305mm 365 x 365 x 355mm
Excluding Feet 11.81 x 11.81 x 11.02” 13.39 x 13.39 x 12.00” 14.37 x 14.37 x13.98”
Enclosure Weight 9.3kg(20.5lbs) 12.1kg(26.7lbs) 16.7kg(36.8lbs)
Mains Voltage  120VNominalAC60Hz,230VNominal50Hz(Switchable)
Maximum Power Consumption 312VA 475VA 810VA
Mains Fuse 120V-T2AL 250V 120V-T3.15AL 250V 120V-T6.3AL 250V
230V-T1AL 250V 230V-T1.6AL 250V 230V-T3.15AL 250V
NOTE:Tannoyadoptsapolicyofcontinuousimprovementandproductspecicationissubjecttochange
without notice.