Tannoy TS2 SUB - Technical Specifications; TS2.10 Specifications; TS2.12 Specifications

TECHNICAL SPECIFICATIONS
TS2.10 TS2.12
Output Power 300W RMS 500W RMS
Low Frequency Response (-6dB) 24Hz 21Hz
(TypicalInRoom)
Inputs 2xPhonoLineLevel,LFEorstereo
Outputs 2xPhonoLineLevel,LFEorstereo
Input Filter 50-150Hz,2ndOrderLowPass,withBYPASSProvision
Driver Type 250mm(10”)Active&PassiveABR 300mm(12”)Active&PassiveABR
Enclosure Type ClosedBox,SideFiring
Enclosure Volume 23.1litre(0.82cu.ft.)   37.5litre(1.32cu.ft.)
Additional Features VariablePhaseControl,0-180degrees
Signal Sense or Always On operation
Enclosure Dimensions, (W x H x D) 390 x 380 x 328mm 440 x 430 x 378mm
 (15.36x14.96x12.91”)   (17.33x16.93x14.88”)
Enclosure Weight 14.5kg(32lbs)   18.2kg(40.1lbs)
Packed Weight 16.5kg(36.4lbs)   20.7kg(45.6lbs)
Mains Voltage 100-120V/ 220-240V 100-240V 50/60Hz
 switchable50/60Hz
NOTE:Tannoyadoptsapolicyofcontinuousimprovementandproductspecicationissubjecttochange
without notice.