SAFETY WARNING
Do not remove any covers, loosen any xings
or allow items to enter any aperture.
SAFETY WARNING
Objects lled with liquids should not be placed
on this apparatus.
AVERTISSEMENT DE SECURITE
Ne retirez pas les couvercles, ne desserrez
pas les xations et ne laissez aucune pièce
s’introduire dans les ouvertures.
AVERTISSEMENT DE SECURITE
Ne placez pas d’objets contenant du liquide à
proximité de l’appareil.
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
7. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including ampliers that produce
heat.
8. Only use attachments/accessories specied
by the manufacturer.
9. Use only with a cart, stand, tripod, bracket,
or table specied by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
10. Refer all servicing to qualied service
personnel. Servicing is required when
the apparatus has been damaged in
anyway, does not operate normally, or has
been dropped.
Introduction
The latest addition to Tannoy’s extensive line of column loudspeakers, VLS Series introduces another
proprietary Tannoy innovation: FAST™ (Focussed Asymmetrical Shaping Technology). By combining
transducer technology from the acclaimed QFlex Series with an innovative new passive crossover
design, FAST provides exceptional acoustical benets, including an asymmetrical vertical dispersion
pattern which gently shapes acoustical coverage toward the lower quadrant of the vertical axis.
This Quick Start Guide presents only the essential information required to properly unpack, connect
and congure a VLS Series loudspeaker. Please consult the full VLS Series Operation Manual for
additional detailed information on low impedance versus 70.7/100 V operation, complex loudspeaker
system conguration, cable types, equalization, power handling, rigging and safety procedures, and
warranty coverage.
The lightning ash with arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage " within the
product's enclosure that may be of sucient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
The lightning ash with arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage " within the
product's enclosure that may be of sucient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.