TaoTronics AP005 - Filter Cleaning and Replacement Procedures; Surface Cleaning; Cleaning the Pre-Filter; Filter Replacement Indicator

FILTER CLEANING & REPLACEMENT
Illustration Credit: TaoTronics
Surface Cleaning
Periodically clean the air inlet and outlet
grills on the surface of the device with a
dry cloth.
Cleaning the Pre-Filter
Clean the Pre-Filter with a vacuum cleaner twice monthly or when the unit becomes
noisy and particulates are visible on the filter surface. (Caution: Do not wash the
Pre-Filter.)
Filter Replacement
Replace the 3-in-1 filter when
the Filter indicator light flashes
on the Control Panel.
Illustration Credit: TaoTronics
9