TaoTronics TT-BA07 User Manual

indicator ashes red and blue alternately). After
approximately 30 seconds, the pairing will be done (LED
indicator in solid blue).
Pair in RX mode:
Press and hold the Power Button of the adapter for 5 seconds
(LED indicator ashes blue slowly). It will start pairing 5 seconds
after being powered on (LED indicator ashes red and blue
alternatively).
1. Activate the Bluetooth function on your phone and search
for the nearby Bluetooth devices:
t'PSJ044FUUJOHT#MVFUPPUI0O
t'PS"OESPJE4FUUJOHT8JSFMFTT/FUXPSLT#MVFUPPUI
0O4DBOGPSEFWJDFT
2. Find “TaoTronics TT-BA07” in the search results and tap on it to
connect. Once connected, the LED indicator will turn solid blue.
Note:
t5IFBEBQUFSFOUFSTQBJSJOHNPEFBVUPNBUJDBMMZXIFO
powered on for the rst time.
t5IFPSJHJOBMQBJSJOHNFNPSZXJMMCFDMFBSFEBGUFSBNPEF
switch. It will automatically start pairing each time it’s
powered on.
t*GB1*/DPEFJTSFRVJSFEGPSQBJSJOHUSZGPVS[FSPFT
8888 (four eights), 1111 (four ones), or 1234.
t5IFBEBQUFSDBOSFNFNCFSQSFWJPVTMZQBJSFEEFWJDFTBOE
will attempt to pair with devices automatically, without going
into pairing mode.
Pair with two devices at the same time
In TX mode:
In TX mode, the adapter is able to pair with two Bluetooth stereo
earphones/speakers at the same time.
1. Follow the previous instructions in the “Pairing” section to pair
the TT-BA07 with your rst device.
2. Turn off the Bluetooth function on your rst device, tap the
Power Button twice to pair and connect to your second
device.
3. Turn on the Bluetooth function on your rst device. In
approximately 30 seconds, the second device will
automatically connect in.
Note:
t8IFOZPVQBJSXJUIUXPEFWJDFTCPUIDBOQMBZNVTJDBUUIF
09/10

TaoTronics TT-BA07 Specifications

General

Charging Time	2 hours
Bluetooth Profiles	A2DP, AVRCP
Codecs	SBC
Material	Plastic
Transmission Range	10 meters (33 feet)
Ports	Micro USB
Bluetooth Version	Bluetooth 4.2
Output	3.5mm Aux