How to pair a new Bluetooth device with TaoTronics Adapter?
To pair your TaoTronics Adapter with a new Bluetooth device, power on the TT-BA09 Pro, then press the Power button twice to enter pairing mode before reconnecting to the paired device.
Why can't my TaoTronics TT-BA09 Pro Adapter reconnect to the last device?
If your TaoTronics Adapter can't reconnect to the last connected device, it might be because the pairing history is cleared each time you switch modes. To resolve this, re-pair your Bluetooth device as instructed in the pairing instructions.
What to do if there is audio delay with TaoTronics Adapter?
If you experience audio delay with your TaoTronics Adapter, ensure your Bluetooth device supports apt-X Low Latency codec. After connecting, the Codec indicator “LL” will light up to indicate the low latency streaming codec.
General| Bluetooth Version | 5.0 |
|---|---|
| Codec Support | SBC, AAC |
| Charging Time | 2 hours |
| Multipoint Connection | Yes |
| Material | Plastic |
| Certifications | FCC, CE, RoHS |
| Bluetooth Profiles | A2DP, AVRCP |
| Input (Power) | 5V/0.5A |
| Ports | 3.5mm audio jack |
| Battery Life | 20 hours |
| Range | 10m / 33ft |
| Input | 3.5mm audio cable |
| Output | 3.5mm audio cable |
| Weight | 30 grams |
Detailed illustration of the device components and their labels.
Explanation of LED indicator lights and their meanings for device status.
Instructions for charging the wireless adapter using a USB port.
Guide for pairing the device in Transmitter (TX) mode with the first Bluetooth device.
Steps to pair the device with a second Bluetooth device in TX mode.
Connecting the adapter to a TV using Optical or AUX audio outputs.
Information on the adapter's ability to automatically reconnect to paired devices.
Procedure to clear the device's pairing history for new connections.
Instructions for connecting the adapter to TVs using an AUX 3.5mm audio output.
Guide for connecting the adapter to TVs via RCA audio output ports.
Connecting the adapter to a PC or laptop for audio transmission.
Steps to pair the device in Receiver (RX) mode with the first Bluetooth device.
How the adapter automatically reconnects to devices in RX mode.
Procedure to clear pairing history for RX mode connections.
Information regarding product warranty and how to contact customer service.
Statement regarding compliance with FCC rules for digital devices.
Guidelines for the correct disposal of the product and electronic accessories.
To Next Page
