· SBC: SBC codec, supported by most Bluetooth® devices
· APTX: Apt-X® codec, the Bluetooth® device shall support Apt-X®
codec. Prior than SBC.
· LL: Apt-X Low Latency® codec, the Bluetooth® device shall
support Apt-X low latency®. Prior than SBC and Apt-X®.
HOW TO USE
Charging
1. Connect the charging port with any USB charging adapter or
active computer USB port.
2. The Power indicator will stay solid on during charging. Once
fully charged, it will turn off.
Note:
· You can use the adapter during charging, however,
there might be background buzz noise.
· We recommend charging the unit for at least 2 hours
before using it for the first time.
AUX
SPDIF IN
SPDIF OUT
DC5V
A
B
SBC
APTX
LL
TX
RX
AUX
SPDIF IN
SPDIF OUT
DC5V
A
B
SBC
APTX
LL
TX
RX
Use in TX Mode | Initial Pairing
TX RX
Turn on: Press and hold the
Power button for 3 seconds
1 2
A
B
SBC
APTX
LL
Pairing: “A” flashes quickly
3
A
Pair with the 1st Bluetooth® Device
ENGLISH / 03 ENGLISH / 04