03/04
Single Earbud Mode
·Take out one of the earbuds from the charging case, and the LED
indicator will ash white. Tap the Touch Control twice to bring the
earbud into pairing mode, the LED indicator will ash blue and white
alternately.
·Turn on the Bluetooth function on your device, search for nearby
devices. Find “TaoTronics TT-BH052” in the searching results. Tap on the
name to connect.
Note:
If you want to change to couple earbuds mode from single earbud
mode, simply take out the other earbud from the charging case, they
will pair with each other automatically.
Operation and Functions
Function Operation
Answer / Hang Up Phone Call
Tap the Touch Control on either of
the earbuds once
Reject Incoming Call
Tap and hold the Touch Control on
either of the earbuds for 2 seconds
Previous Track
Tap the Touch Control on the left
earbud twice
Next Track
Tap the Touch Control on the right
earbud twice
Play / Pause
Tap the Touch Control on either of
the earbuds once
Volume -
Tap and hold the Touch Control on
the left earbud for over 3 seconds
Volume +
Tap and hold the Touch Control on
the right earbud for over 3 seconds
Turn On / Off Voice Control
When paired successfully, press
and hold the Touch Control on
either of the earbuds for 2 seconds
until a beep is heard
the left earbud will ash blue and white alternately and the LED
indicator on the right earbud will ash white slowly.
· Turn on the Bluetooth function on your device and search for nearby
devices. Find “TaoTronics TT-BH052” in the searching results. Tap on the
name to connect. Once connected, the LED indicators on both
earbuds will ash white once every 5 seconds.
To Next Page
Loading...
Need help?
General
