TaoTronics TT-BH097 - User Manual

Questions and Answers

M
Mrs. Mariah Oneal DDSAug 16, 2025
Why can't my device find “TAOTRONICS SoundLiberty 97” headphone in the Bluetooth list?
- J
  Jennifer DouglasAug 16, 2025
  If you can't find “TAOTRONICS SoundLiberty 97” in the Bluetooth device list, it might be because the earbuds reconnected with a previously paired device automatically. To fix this, try deactivating the Bluetooth function of the previously paired device or clear “TAOTRONICS SoundLiberty 97” from its Bluetooth device list, and then search again. Also, ensure the device you want to connect is close to the earbuds.
T
Tiffany DavisAug 19, 2025
Why is my TaoTronics headphone connection unstable?
- L
  Laurie MoranAug 19, 2025
  If your TaoTronics headphone connection is unstable, try keeping the earbuds close to your Bluetooth device. Remember that obstacles can shorten the effective distance. Also, turn off other Bluetooth devices to decrease interference.
P
patriciasimpsonAug 21, 2025
How to fix TaoTronics headphone that won't turn on?
- Z
  zjamesAug 22, 2025
  If your TaoTronics earbuds won't turn on, it's likely due to a low battery. Please charge them.
N
Nicholas BeckerAug 25, 2025
How to fix TaoTronics headphone that won't charge?
- S
  Stephanie DelacruzAug 26, 2025
  If your TaoTronics earbuds are not charging, place the earbuds into the charging case properly and make sure the charging case is fully charged.
D
David ParsonsAug 28, 2025
Why is the sound quality of my TaoTronics headphone so poor?
- M
  Matthew ThompsonAug 28, 2025
  If you are experiencing poor sound quality with your TaoTronics earbuds, ensure that you wear the earbuds properly and keep them close to each other. Place the connected device close to the earbuds, or remove any obstacles between them. Also, clear any debris on the earbuds.
R
Richard EdwardsAug 31, 2025
What to do if the multifunction touch control of my TaoTronics headphone is unresponsive?
- N
  Nicole BowersAug 31, 2025
  If the multifunction touch control of your TaoTronics earbuds is unresponsive, place the two earbuds into the charging case and cover the lid, disconnecting the Bluetooth connection. Then, uncover the lid to turn on the earbuds and pair them again.
M
Michelle HicksSep 2, 2025
Why can't the other party hear my voice when I use my TaoTronics headphone during a phone call?
- C
  Charles EdwardsSep 3, 2025
  If the other party can't hear you during a phone call using your TaoTronics headphone, make sure that the built-in microphone is free of any covers.
E
epearsonSep 6, 2025
What to do if I can’t hear the other party during a phone call using my TaoTronics headphone?
- M
  Margaret MirandaSep 6, 2025
  If you can't hear the other party during a phone call with your TaoTronics headphone, try setting the volume to a higher level.
P
Pamela SmithSep 8, 2025
What to do if there is no sound in one of the TaoTronics TT-BH097 earbuds?
- J
  Jenna LewisSep 8, 2025
  If one of your TaoTronics earbuds has no sound in couple earbuds mode, place both earbuds back into the charging case and then take them out. They will pair with each other automatically. If pairing fails, restore them to the factory settings as instructed in the “Clear Pairing List” section.
E
Emma BergerSep 12, 2025
Why can’t I charge the charging case of my TaoTronics TT-BH097 Headphone?
- V
  vmahoneySep 12, 2025
  If you are unable to charge the charging case for your TaoTronics earbuds, ensure that the charging cable is intact and plugged in properly.