If you failed to pair your device with the earbuds, please clear the pairing history
as instructed below:
1. Place both earbuds back in the charging case with the lid uncovered.
2. Press and hold the Reset Button on the back of the charging case for 8
seconds until the LED indicators on the earbuds flash blue and white alternately.
3. If you have paired your device with the earbuds before, remove
"TAOTRONICS SoundLiberty 97" from the Bluetooth device list and pair again.
4. Re-pair with your Bluetooth® device as instructed in “Pairing” section.
Clear Pairing List
Note:
If you want to pair the earbuds with another device when you
have already paired them with a device, deactivate the Bluetooth
function on the paired device or clear "TAOTRONICS SoundLiberty
97" from its Bluetooth list. Restore the earbuds to factory settings as
instructed above if pairing failed.
Operation and Functions
Function
Play / Pause
Volume +
Volume -
Next Track
Previous Track
Answer Phone
Call
Hang Up
Phone Call
Decline an
Incoming Call
Operation
Tap the Touch Control on either of
the earbuds twice under music
Tap the Touch Control on the right
earbud once
Tap the Touch Control on the left
earbud once
Tap the Touch Control on the right
earbud three times
Tap the Touch Control on the left
earbud three times
• Answer via earbuds: Tap the Touch
Control on either of the earbuds
once
• Answer via mobile phone: Tap
Answer on the mobile phone
Tap and hold the Touch Control on
either of the earbuds for 2 seconds
Tap and hold the Touch Control on
either of the earbuds for 2 seconds
Voice Prompt
/
Toots when highest
setting is reached
/
/
/
/
/
Call rejected
13
15 17 19
21 23 25 27 29
31 33 35 37
02 04 06 08 10
12
14
16 18 20
22 24 26 28 30
32 34 36
To Next Page
Loading...
Need help?
General
