Single Earbud Mode
Pair both earbuds with your device in Couple Earbuds Mode before using in Single
Earbud Mode.
Use Primary (Left) Earbud Only
1. Take out the primary (left) earbud from the charging case, and make sure the
secondary (right) earbud is placed in the charging case and the lid is covered.
2. It will try to pair with the last connected device for the first 20 seconds. If
re-pairing failed in 20 seconds, the earbud will enter pairing mode with LED
indicator flashing blue and white alternately.
3. Turn on the Bluetooth function on your device and search for the nearby devices.
Find "TAOTRONICS SoundLiberty 97" in the searching results, tap on the name to
connect.
Use Secondary (Right) Earbud Only
1. Take out the secondary (right) earbud from the charging case, and make sure
the primary (left) earbud is placed in the charging case and the lid is covered.
2. The secondary earbud will enter pairing mode with LED indicator flashing blue
and white alternately.
3. Turn on the Bluetooth function on your device and search for the nearby devices.
Find "TAOTRONICS SoundLiberty 97 R" in the searching results, tap on the name
to connect.
Note:
If you want to change to couple mode, simply take out the other
earbud from the charging case, they will pair with each other
automatically.
Manually Pairing
1. Place both earbuds back in the charging case with the lid uncovered.
2. Press and hold the Reset Button for 3 seconds to disconnect the currently
paired device.
3. The earbuds will enter pairing mode with the LED indicator on the earbud
flashing blue and white alternately.
4. Pair with your new Bluetooth® device as instructed in “Pairing” section.
Note:
The pairing history will not be cleared under this operation.
11
13 15 17 19
21 23 25 27 29
31 33 35 37
02 04 06 08 10
12
14 16 18 20
22 24 26 28 30
32 34 36
To Next Page
Loading...
Need help?
General
