TaoTronics TT-BH16 User Manual

LED Indicators
Status
Charging
Fully charged or off
In Pairing mode
Disconnected from the
Bluetooth device
Paired with a Bluetooth
device
Low battery
Incoming call
LED Indicator
Red LED on
LED off
Flashes blue and
red
Flashes blue
once every 3
seconds
Flashes blue
twice every 5
seconds
Slowly ashes red
Fast ashes blue
V4.1 + EDR
A2DP, AVRCP, HSP, HFP
aptX
33 feet (10 meters)
DC 5V
Approx. 7 hours
2 hours
66.1 x 1.73 x 2.99 cm
26.02 x 0.68 x 1.17 in
14.6 g / 0.48 oz
Bluetooth
Bluetooth Prole
Audio Codec
Range
Charging Input
Working Time
Charging Time
Dimensions
Weight
Note:
• During a phone call, press the Multifunction Button
twice to switch the call between your phone and
the earphones.
• The availability of Voice Control functionality
depends on your smartphone.
Specications
Note: The earphones will not automatically
connect to a Bluetooth
®
device when switched on,
please read the next section on how to connect to
your Bluetooth
®
device.
How to Use
1. Charging
1) Connect the charging port with any USB
charging adapter or active computer USB port.
2) Charging will start automatically with the LED
indicator turning red.
3) The earphones are fully charged when the LED
indicator turns off.
2. Pairing
1) Make sure the earphones and your Bluetooth
®
device are next to each other (within 3 feet /
1 meter).
2) Press and hold the Multifunction Button for 5
seconds to bring the earphones into pairing mode
with the LED indicator ashing blue and red.
3) Activate the Bluetooth
®
function on your phone
and search for nearby Bluetooth
®
connections:
• For iOS: Settings > Bluetooth > On
• For Android: Settings >Bluetooth: On >
Scan for devices
4) Find “TaoTronics TT-BH16” in the search results. Tap
on the name to connect. Once connected,the
blue LED will ash twice every 5 seconds.
Note:
• If a PIN code is required for pairing, try “0000”
(four zeroes).
• The Bluetooth earphones can remember previously
paired devices. If you have previously paired the
earphones with a device, simply turn on your device
and the earphones (by pressing the Multifunction
Button for 3 seconds to turn on), they will connect
to the last connected device automatically
without going into pairing mode.
3. Pairing with two devices at the same time
Although you can pair with two devices, only one of
them can play music or make phone calls with the
headphone at any time. To pair with two devices:
1) Follow the previous instructions in the “Pairing”
section to pair the TT-BH16 with your rst device.
2) Turn off the Bluetooth
®
function of your rst device
and follow the “Pairing” instructions again to pair
and connect to your second device.
3) With the Bluetooth
®
function on both devices
turned on, switch between the two paired devices
by pausing the music on the rst device and
playing music on the second device.
4. How to Wear
Please wear the earphones as shown in the diagram:
05/06

TaoTronics TT-BH16 Specifications

General

Brand	TaoTronics
Model	TT-BH16
Category	Headphone
Language	English