1) Follow the “Bluetooth Pairing” instructions to pair the TT-BR03 with your first device;
2) Turn OFF the Bluetooth of your first device, and TT-BR03 will switch into pairing mode
automatically;
3) Connect your second device with TT-BR03;
4) Turn ON the Bluetooth of your first device and select “TaoTronics TT-BR03” on your phone, now
both device are paired with the TT-BR03;
5) To play music between the two devices, simply pause the music on the first device and play
music on the second device or vice versa.
4. Re-connect
The TT-BR03 Bluetooth hands-free car kit can remember previously paired devices. If you have
previously paired it with a device, simply turn on your device and the hands-free car kit, then they will
connect automatically without going back into pairing mode.
Trouble shooting
Q: My TT-BR03 Bluetooth Hands-Free Car Kit will not switch on.
A: Please check whether it has proper power supply (car charger or another USB power source) and
make sure the power switch has been turned “ON”.
Q: The device is turned on, but I cannot find it from my smartphone/tablet.
A: In order for the receiver to be found, you must first bring the receiver into pairing mode. Please
refer to “Bluetooth Pairing” section.
Q: I am having trouble pairing and connecting to my Bluetooth pairing device.
A: Please check the following points:
• Make sure your Bluetooth device supports A2DP profile;
• Make sure the TT-BR03 and your device are next to each other or within 3 feet;
• You must get the TT-BR03 into pairing mode with the LED indicator flashing red and blue
alternately.
• Clear the paired list.
Q: After connecting and pairing with my Bluetooth device, I cannot hear any music from my
sound system.
A: Please check the following:
• Make sure your car support’s AUX and its audio source has been set to LINE IN or AUX;
To Next Page
Loading...
Need help?
General