SPECIFICATIONS
Model
Voltage
Power
Storage Temperature
TT-CL016
AC 100-240V, 50/60Hz
DC 12V 1.0A
12W Max.
-20°C -50°C / -4°F -122°F
PREPARING FOR USE
1. Put the lamp on a flat and stable surface using the support foot ( Fig.2 ).
2. Connect to a power source with the included power adapter. The unit will
enter standby mode, and the Power Button indicator will light up ( Fig.3 ).
USING YOUR SAD LIGHT
Power On / Off
1. Tap the Power Button once to turn on / off the lamp.
2. Press the + / - Button on the panel to choose the most comfortable
brightness for you.
3. If power is not disconnected, the lamp will remember the light brightness
of last use when turned on again.
EN EN
Note: Unplugging the lamp will reset the setting.
03 05 07 09 11 13 15 17 19
21 23 25 27 29 31 33 35 37 39
41 43 45 47 49 51 53 55 57 59
61 63 65 67 69 71 73 75 77 79
81 83 85 87 89 91 93 95 97 99
02 04 06 08 10 12 14 16 18
20 22 24 26 28 30 32 34 36 38
40 42 44 46 48 50 52 54 56 58
60 62 64 66 68 70 72 74 76 78
80 82 84 86 88 90 92 94 96 98
To Next Page
Loading...
Need help?
General