How to Use
Warm White Light Mode
1. Tap on the Power Button to turn on the light, which will activate Warm White Light Mode.
Tap again to power off.
2. When the light is on, tap and hold on the Power Button to adjust the brightness.
When the light is on, tap twice to switch to Multicolor Light Mode.
Multicolor Light Mode
1. In Multicolor Light Mode, the light stays on one color by default.
2. Tap on the Power Button to switch off the light.
3. Or press and hold the Power Button to start Carousel Mode, where different colors will
be automatically cycled through.
4. In Carousel Mode, tap the Power Button once to stay on the current color. Tap one
more time to power off the light, or tap twice to switch back to Warm White Light Mode.
Charging
When charging, the charging status indicator will turn red. When fully charged, the
indicator will turn blue. When the battery level is low, the indicator will ash red.
Brightness & Color Temperature Memory Function
The light will automatically resume the brightness and color temperature of when it was
last turned off.
Tip: Set the light to low brightness level before turning it off to prevent glare.
Caution
• Please do not repair the product by yourself, always ask a professional electrician or
authorized technician for repairs.
• If you smell a bad odor or anything unusual, please turn off the unit immediately.
03/04
Product Diagram
①
②
③
④
⑤
⑥
Handle
Power Button
Lamp Body
Charging Input Port
Charging Status Indicator
Reset Button
①
②
③
④
⑤
⑥
To Next Page
Loading...
Need help?
General
