TaoTronics TT-DL036 - Color Temperature Control; Memory Function; Wireless Charger

01/02
EN
What’s In the Box
· TaoTronics LED Desk Lamp (TT-DL036)
· Power Adapter
Specications
Model
Light Source
CRI
Operating Voltage
Power (Only for the Light)
USB Output
Wireless Charger Output
Lumens
Color Temperature
Operating Temperature
Lifespan
TT-DL036
LED
>80
DC 10V / 3A
12W
5W
10W
410 lm
2700-6000K
-10 °C to 40 °C / - 14 °F to 104 °F
50,000 hours
How to Use
Power On / O
· Connect the adapter to a wall outlet, the lamp enters standby mode, all indicators ash
twice
· Tap the Power Button to turn on / off the lamp
Brightness Control
Slide your nger along the Brightness Slider to adjust the brightness
Color Temperature Control
Tap on the Mode Button to cycle through 5 levels of color temperature
Memory Function
The lamp will retain the color temperature and brightness setting of the time when it was last
turned off.
Note: Set the lamp to low brightness level when you turn it off to prevent glare.
USB Port
Charge your smartphone, tablet, e-reader or any USB devices through the 5V/1A USB port.
Wireless Charger
Place your phone with Qi-BPP compatibility on the wireless charging station to automatically
start charging.
Note:
If charging does not occur, adjust the phone so its receiver can be detected. Please note
that different model phones have their receivers in different positions.
Caution
· Hold the lamp base when adjusting the angle of the lamp head.
· Rotate the lamp head within an appropriate angle range. Do not pull with excessive force
to prevent damaging the product