What to do if the TaoTronics Outdoor Light touch panel is not responsive?
If the TaoTronics Outdoor Light's touch panel isn't responding, it might be due to a wet hand. Ensure your hands are dry when touching the Brightness Control Button. Alternatively, voltage fluctuation could be the cause. If so, press the Reset Button.
Why TaoTronics Outdoor Light does not light up?
If your TaoTronics Outdoor Light isn't lighting up, the cause may be no power supply. Ensure the device is correctly powered on.
Tap the Brightness Control Button to turn the light on or off.
Press and hold the button to adjust brightness; it increases or decreases accordingly.
Indicator is red when charging, blue when fully charged, and flashes red when battery is low.
General| Battery Capacity | 2200mAh |
|---|---|
| Water Resistance | IP65 |
| Material | ABS plastic |
| Sensing Angle | 120 degrees |
| Sensing Distance | 26 feet |
| Color Temperature | 3000K |
| Power Source | Solar |
| Charging Time | 6-8 hours |
| Working Time | Up to 12 hours |
| Installation | Wall Mounted |
To Next Page