Why is air escaping from the rim of my TaoTronics Electric Pressure Cooker lid?
Air might be escaping from the rim of the lid for several reasons: * The sealing ring may not be installed correctly; ensure it is properly installed. * There could be food residue on the sealing ring; clean the sealing ring. * The sealing ring might be worn out and need replacement. * The lid may not be locked properly; make sure to close the lid correctly.
What to do if air escapes from the float valve of my TaoTronics TT-EE006 Electric Pressure Cooker?
If air escapes from the float valve, it could be due to: * Food stuck on the sealing ring of the float valve. Clean the sealing ring. * The sealing ring of the float valve being worn out. Replace the sealing ring.
What to do if the lid of my TaoTronics TT-EE006 doesn’t lock?
If the lid doesn’t lock, it is likely that the sealing ring is not properly installed. Ensure that the sealing ring is correctly installed.
What to do if I fail to open the lid after air inside the TaoTronics TT-EE006 is fully released?
If you can't open the lid after the air is released, the float valve is probably still up. Press the float valve down.
Why won't the float valve rise on my TaoTronics TT-EE006?
The float valve might not rise because there isn't enough food and water in the pot. Add a sufficient quantity of both.
Instructions for operating the pressure cooking function.
General| Material | Stainless Steel (Inner Pot) |
|---|---|
| Capacity | 6 quarts |
| Power | 1000 watts |
| Cooking Programs | Rice, Meat/Stew, Steam, Yogurt, Slow Cook, Keep Warm |
| Safety Features | Overheat protection, safety lock |
To Next Page