9 ENGLISH
ENGLISH 10
Set Up Your TT Router
6. Add More TT Routers
If there are multiple TT Routers,
you can add more for wider Wi-Fi
coverage.
a. Place the Child Router and
the Master Router (the router
connected to Upper-layer
Gateway) within 16 feet / 5
meters, and then power it on.
b. Wait until the indicator flashes
green, then the Child Router is
ready for network setup. If the
indicator does not flash green,
please reset the router and try
again.
c. Tap “Add another TT Mesh
Router”or tap “+” on the top
right corner of Homepage to add more TT Routers.
d. Once setup completed, the indicator of the child router will
turn soild blue.
e. Place the child router in a location that requires wider Wi-Fi
coverage. Power it on and the child router is ready for use now.
Note: The yellow or red indicator indicates a poor network or
disconnected network. Please place the Child Router close to
the Master Router.
Homepage
Router Status, Speed &
Devices
After successfully set up your TT Router
network, you will be directed to the
Homepage. Here you can check the
working status of all Routers and the
connected devices, as well as manage
your network.
User Management
Me
In User Management (Me) page, you
can Manage Message, Change Network,
Add Network, Get Help and Feedback,
Check Services & Privacy or Logout app.
To Next Page
Loading...
Need help?
General