3. Connect the front and rear base parts by pushing the plastic pegs
on one half into the corresponding slots on the other half.
4. Align the 3 screw holes on the fan base and the body. Secure the
assembled base to the fan body by inserting the 3 provided thumb
screws in the screw holes and well screwing them.
5. Place the power cord into the cord guides along the inside of fan
base, exit through the notched opening, to ensure a flat and stable
base for the fan.
Important: Do not plug in the power cord before the base
is correctly assembled with the 3 thumb screws.
09 10
To Next Page
Loading...
Need help?
General
