Need help?Do you have a question about the Tapco C-12 and is the answer not in the manual?
General| Brand | Tapco |
|---|---|
| Model | C-12 |
| Category | Music Mixer |
| Language | English |
Trim, EQ, Monitor, Aux, Effects controls.
Insert points, direct outs, and signal path interruption.
Gain adjustment and overload indication.
3-band EQ with adjustable midrange frequency.
Enhances flexibility for recording and reinforcement.
+48VDC Phantom Power for condenser microphones.
Explains power requirements for condenser mics.
Lists mics compatible with phantom power.
Lists phantom power compatible and incompatible mics.
Setup example for a 5-piece band in mono.
Ways to record mono PA and multi-track simultaneously.
Method for 4-track recording simultaneous with live PA.
Connection and setup for stereo PA systems.
Details on recording with the C-12, focusing on 4 tracks.
Fitting signals into tape recorder's dynamic range.
Recording initial rhythm tracks for a band.
Adding vocals and solos to recorded tracks.
Combining tracks to create a stereo mix.
Connecting the C-8E expander to the C-12 mixer.
Rear panel connections between C-8E and C-12.
Block diagram illustrating input channel signal flow.
Block diagram showing signal flow for C-8E and C-12.
Technical performance data for the C-12/Series Two system.
To Next Page
