Need help?Do you have a question about the Tapco MIX.220FX and is the answer not in the manual?
General| Brand | Tapco |
|---|---|
| Model | MIX.220FX |
| Category | Music Mixer |
| Language | English |
Steps to prepare the mixer by setting all controls to their default positions before initial use.
Guide on how to connect speakers, amplifiers, microphones, and instruments to the mixer.
Procedure for adjusting input gain and fader levels for microphone and line-level sources.
Procedure for adjusting input levels for stereo line sources using gain switches and faders.
Details the four low-noise, phantom-powered microphone preamplifiers and XLR inputs.
Describes the 1/4" TRS and TS jacks for line-level instruments and devices.
Explains unity gain and the High, Mid, and Low EQ adjustments for channel tone shaping.
Details the 75Hz low-cut switch and the variable mid-frequency control.
Describes routing signals to monitor or effects processors via MON and FX sends.
Details choosing from 16 presets and adjusting effect strength with VARIATIONS.
Explains adjusting the signal level into the processor and monitoring the FX OL LED.
Describes how to mute the internal effects processor via switch or footswitch.
Steps to diagnose and resolve power-related issues with the mixer.
Steps to diagnose and resolve issues with individual channels or audio outputs.
Steps to identify and eliminate noise problems in the audio signal path.
Details the one-year warranty on materials, workmanship, and operation.
Outlines the process for obtaining warranty repair or replacement.
Specifies conditions that void the warranty and limitations on liability.
To Next Page
