To Next PageTo Next Page
Need help?Do you have a question about the Tape King TX100 and is the answer not in the manual?
Lists and describes the main parts of the tape gun, including the plastic swiper, blade cover, roller guide, metal clasp, handle, tape, knob, and holder.
Insert the tape roll into the holder with the adhesive side down before peeling off the tab.
Carefully remove the blue plastic blade cover to avoid cutting yourself on the sharp blade.
Pull tape out using the guide, between the roller and clasp, then use the blade for the first cut.
Turn the blue knob clockwise to tighten or counter-clockwise to loosen brake tension for roller speed control.
Begin taping boxes, cartons, etc. Use the swiper with a tilt forward to press tape for a better seal.
The Tape King TX100/TX300 is a packing tape gun designed for efficient and hassle-free application of packing tape. It is a handheld device that simplifies the process of sealing boxes, cartons, and other packages, making it suitable for both personal and professional use. The device comes with a 1-year warranty, and customer support is available via support@tapeking.com. Instructional videos are also available on YouTube by searching for "Tape King TX100."
The primary function of the Tape King TX100/TX300 is to dispense and cut packing tape quickly and cleanly. It holds a roll of tape, guides it onto the surface to be sealed, and provides a mechanism for cutting the tape once the desired length is applied. The design focuses on user comfort and ease of operation, aiming to reduce strain during prolonged use.
The tape gun is composed of several distinct parts, each serving a specific purpose in its operation:
A: Clear Rectangular Plastic Swiper: This component is used to cut the tape and to press down on the applied tape to create a better seal. When cutting, it should be tilted forward. After taping, it can be used in a swiping motion to ensure the tape adheres firmly to the surface. Users are cautioned not to use excessive force with this part to prevent breakage.
B: Blue Plastic Blade Cover: This cover protects the user from the sharp blade when the tape gun is not in use or during tape roll changes. It needs to be carefully removed before operation. Users are advised to exercise caution to avoid cutting themselves and may use fingers or a small tool to pry it off if it gets stuck.
C: Black Plastic Roller Guide: This roller helps guide the tape smoothly as it is dispensed from the roll. The tape is threaded between this roller and the metal clasp (D).
D: Metal Clasp: Working in conjunction with the black plastic roller guide (C), the metal clasp helps secure the tape in place and guides it for proper dispensing.
E: Ergonomic Handle: Designed for comfort, the handle allows for a secure and comfortable grip during use, reducing hand fatigue, especially during extended packing sessions.
F: Roll of Tape: This is the consumable item that the device dispenses. The tape is inserted into the tape roll holder (H) with the adhesive side facing down.
G: Blue Round Knob: This knob serves as a tension adjustment mechanism. By turning it clockwise, the brake tension is tightened, which slows down the roller speed and controls tape dispensing. Turning it counter-clockwise loosens the tension. Users are recommended to turn it clockwise a few times but cautioned not to overtighten, allowing them to adjust the tension to their liking for optimal roller speed.
H: Tape Roll Holder: This is where the roll of tape (F) is securely mounted within the device.
Insert Tape Roll: Begin by inserting a roll of tape into the Tape Roll Holder (H). Ensure that the adhesive side of the tape is facing down before peeling off the tab.
Remove Blade Cover: Carefully remove the blue plastic blade cover (B). Exercise caution to avoid contact with the sharp blade. If stuck, use fingers or a small tool to pry it off.
Thread and Cut Tape: Pull the tape out using the starting guide, following the arrows. Thread the tape between the black roller guide (C) and the metal clasp (D), ensuring the sticky side remains facing down. Pull out enough tape and use the blade (A) to make the first cut. This prepares the tape gun for immediate use on boxes.
Adjust Tension: Adjust the blue round knob (G) to control the brake tension and roller speed. Turn clockwise to tighten (slower speed) and counter-clockwise to loosen (faster speed). A few clockwise turns are recommended, but avoid overtightening. Adjust to personal preference for optimal tape dispensing.
Start Taping: If using a new roll, pull the tape up and out, then make a cut with the blade (as in step 3). Begin taping your box, carton, or other packages.
Cut and Seal: To cut the tape, use the clear rectangular swiper (A) and tilt it forward. Avoid excessive force to prevent breakage. After taping, use the swiper piece to press down on the tape in a swiping motion, which helps create a better, more secure seal.
While the manual does not explicitly detail maintenance features, the design implies a focus on durability and ease of use. The 1-year warranty suggests a commitment to product longevity and support for any manufacturing defects. The ability to easily replace tape rolls is a key aspect of its ongoing usability. The warning regarding the blade cover and the swiper's usage also implies a design that considers user safety and proper handling to prevent damage to the device. The clear instructions for threading tape and adjusting tension contribute to user-friendly maintenance, as proper setup can prevent operational issues.
General