Tapeswitch PRSU/2 - User Manual

© Copyright (2021) All rights reserved. Changes, which serve technical improvements are reserved.
1
PRSU Series, Operating Instructions Manual (Revision 1.0)
TAPESWITCH CORP.
100 Schmitt Boulevard
Farmingdale
New York 11735
Phone: 800-234-8273
Fax: 631-630-0454
info@tapeswitch.com
www.tapeswitch.com
Introduction
This operating instruction shall familiarize you with the safety relay controller
models: PRSU/2, PRSU/4 and PRSU/5.
Target Audience
These operating instructions are addressed to the following personnel:
▪ Skilled personnel who plan or develop safety equipment for machines
and plants, who are familiar with the safety instructions and safety
regulations.
▪ Skilled personnel who build, install, maintain and operate safety
equipment in plants and machinery.
Symbol Key
These operating instructions contain several symbols which are used to
highlight important information:
This symbol indicates text passages which must absolutely be paid attention
to. Disregarding may lead to serious personal injury or damage to property.
This symbol indicates text passages which contain important information.
This sign is used to indicate actions by the installer or operator.
This sign illustrates that a condition has changed after an action has been
carried out.
PRSU/2, PRSU/4, PRSU/5
Operating Instructions Manual
Safety controllers for safety mats and
sensing edge products

Tapeswitch PRSU/2 Specifications

General

Brand	Tapeswitch
Model	PRSU/2
Category	Controller
Language	English

Summary

PRSU Safety Relay Introduction and Safety

Manual Introduction and Purpose

Provides an overview of the operating instructions and their purpose.

Intended User Audience

Identifies skilled personnel for safe and effective operation and maintenance.

Key Symbols for Safety Information

Explains symbols used to highlight critical safety and operational information.

Safety Indications and Warnings

Outlines intended applications and critical safety warnings for device operation.

PRSU Safety Relay Electrical Specifications

PRSU;2 Electrical Overview and Terminals

Details the functional schematic and device terminals for the PRSU/2 model.

PRSU;4 Electrical Overview and Terminals

Details the functional schematic and device terminals for the PRSU/4 model.

PRSU;5 Electrical Overview and Terminals

Details the functional schematic and device terminals for the PRSU/5 model.

PRSU Safety Relay Installation and Operation

Device Startup Verification Procedures

Step-by-step verification process for ensuring correct device startup and functionality.

Application Limits and Wiring Configurations

Guidelines for product limits, wiring configurations, and safety standards.

Device Mounting and DIN-Rail Attachment

Instructions for mechanical mounting, including DIN-rail attachment details.

Automatic RESET Mode Configuration

Explains the wiring and operation for the automatic RESET mode.

Manual RESET Mode Configuration

Explains the wiring and operation for the manual RESET mode.

Conditional RESET Mode Configuration

Explains the wiring and operation for the conditional RESET mode.

Dual Channel Monitoring Configuration

Details the dual-channel configuration for fail-safe applications.

Single Channel Monitoring Configuration

Details the single-channel configuration for non-safety applications.

PRSU Safety Relay Maintenance and Troubleshooting

Maintenance and Device Replacement Procedure

Step-by-step guide for device maintenance and replacement.

Fault Diagnosis and Corrective Actions

Guide to diagnosing common faults and recommended subsequent measures.

Technical Data for PRSU;2

Comprehensive electrical, mechanical, and environmental specifications for PRSU/2.

Technical Data for PRSU;4 and PRSU;5

Comprehensive electrical, mechanical, and environmental specifications for PRSU/4 and PRSU/5.