What to do if Tar River Lawn Mower belts are sliding?
If the belts on your Tar River Lawn Mower are sliding, it could be due to several reasons. The belts may not be tightened sufficiently, they might be wet or worn out, or they could be of different lengths. To resolve this, check and adjust the tension of the belts. Avoid mowing in the rain. Replace the belts with new sets, ensuring you use one brand with belts of the same dimensions.
Why Tar River BDR-135 has a bad cut and clogs?
A bad cut and clogging in your Tar River Lawn Mower's cutting system is often caused by dull or damaged blades. Replace dull or damaged blades with new sets. Blades dull on one side should be installed on the disc with the opposite direction of rotations.
How to fix increased vibrations of Tar River BDR-135?
Increased vibrations in your Tar River Lawn Mower are often due to unevenly worn out or damaged elements of the cutting system. Replace the worn out elements with a whole new set.
What to do if Tar River BDR-135 cutting system tilts to the back?
If the cutting system of your Tar River Lawn Mower tilts backward during normal operation, it's likely due to the fuse. The fuse spring might be lightly tightened or damaged. Check and adjust the tension of the spring; replace it if it is damaged.
Explains the intended use of the Drum Mower for cutting low stem green fodder.
Defines hazard alert symbols and signal words like DANGER, WARNING, CAUTION.
Provides essential precautions for safe operation and handling of the equipment.
Instructions on maintaining and replacing safety decals on the equipment.
Key safety checks and procedures to follow before starting the mower.
Critical safety measures to observe while the mower is in operation.
Guidelines for safe transportation of the mower on public roads and highways.
Details on checking equipment at purchase and filling out warranty forms.
Lists the basic equipment included with the mower and spare parts.
Describes the main components and design features of the drum mower.
Step-by-step guide for attaching the mower to the tractor using the three-point system.
Instructions for assembling the PTO shaft, including safety warnings.
Procedure for shortening the PTO driveline, including measurements and safety.
Instructions for changing the mower from operating to transport position.
Guidelines for securing the mower during transport and checks.
Steps to reposition the mower from transport to operating mode.
Adjusting upper connector length and proper operating mode setup.
Steps for changing the mower's cut height using spacers.
How to properly operate the mower, including speed and field conditions.
Procedure for placing the mower in its resting position after use.
Instructions and safety precautions for installing and removing mower blades.
Details the duration and coverage of the manufacturer's limited warranty.
Explains how to register the equipment to qualify for warranty coverage.
General| Brand | Tar River |
|---|---|
| Model | BDR-135 |
| Category | Lawn Mower |
| Language | English |
To Next Page
