Tar River DRL-072 - Page 29

29
DRL-048, DRL-072 Crop Seeder
Frame Assembly
Item
Part # Description Qty.
1 DL4001-48 Frame; DRL-048 1
DL4001-72 Frame; DRL-072 1
2 DL10001-48 Step board; DRL-048 1
DL10001-72 Step board; DRL-072 1
3 DL6002 U-bolt 10
4 FW12 Flat washer M12 -
5 LW12 Lock washer M12 -
6 NM12175 Nut M12 x 1.75 -
7 DL6006 Scraper assembly (inner) 10
8 DL6007 Scraper assembly (outer) 10
9 DL6016 Cloture fender 10
10 DL6017 Cloture spring 10
11 DL6010 Cloture mounting bracket 10
12 DL6011 Shoulder pin M8 x 35 20
13 LFW08 Large flat washer M8 20
14 CP2.5x20 Cotter pin M2.5 x 20 40
15 DL6008 Complete cloture disc assembly 10
DL6001 Disc assembly w/discs, bearings & arm 10
16 DL6004 Disc (single) 10
17 DL8001 Roller downforce adjustment wheel 2
18 LNM1620 Self locking nut M16x2.0 2
19 DL8002 Roller downforce rod 2
20 DL8004 Roller downforce spring 2
21 CP3 x 35 Cotter pin M3 x 35 2
22 DL8009 Shoulder pin M16 x 70 2
23 FW16 Flat washer M16 2
24 DL4003 A-frame straps front 2
25 DL4004 A-frame rear support 1
26 BM182550 Bolt HH M18 x 2.5 x 50 2
27 FW18 Flat washer M18 -
28 LW18 Lock washer M18 -
29 NM1825 Nut HH M18 x 2.5 -
30 BM1825110 Bolt HH M18 x 2.50 x 110 2
31 BM1217580 Bolt HH M12-1.75 x 80 4
32 NM12175 Nut HH M12-1.75 4
33 BM1217575 Bolt HH M12-1.75 x 75 -
34 DL6003 Cap