Tar River DRL-072 - Page 31

31
DRL-048, DRL-072 Crop Seeder
Roller Assembly
Item
Part # Description Qty.
1 DL9001-48 Drive roller; DRL-048 1
DL9001-72 Drive roller; DRL-072 1
2 DL8008 Roller arm (Does not include Downforce Assembly) 2
3 B60062RS Bearing 6006 2RS 8
4 SRI-55 Snap ring, internal M55 4
5 DL10012 Dust roller cap 2
6 DL11013 U-bolt M10 - 1.5 x 140 2
7 FW10 Flat washer M10 4
8 LW10 Lock washer M10 4
9 NM1015 Nut HH M10-1.5 4
10 BM12175110 Bolt HH M12-1.75 x 110 4
11 DL8003 Bracket roller arm 4
12 FW12 Flat washer M12 4
13 LW12 Lock washer M12 4
14 NM12175 Nut HH M12-1.75 4
15 DL9006-48 Scraperboard rod for DRL-048 1
DL9006-72 Scraperboard rod for DRL-072 1
16 NM08125 Nut HH M8-1.25 -
17 LW08 Lock washer M8 -
18 BM0812550 Bolt HH M8-1.5 x 50 -
19 LFW18 Large flat washer M8 -
20 DL11012 Flap, 7.25” (DRL-048; 6 pcs / DRL-072; 1 pc) -
DL11012A Flap, 8.25” (DRL-072; 7 pcs) -
21 DL11009 Flap spring -
22 DL11001 Downforce springs, cultipacker 2
23 DL9002-48 Cultipacker complete, DRL-048 1
DL9002-72 Cultipacker complete, DRL-072 1
DL9003 Cultipacker wheel sections 12-17
24
25 DL4002 Packer arm, DRL-048 2
26 FW24 Flat washer M24 4
27 DL9007-48 Cultipacker rod, DRL-048 1
DL9007-72 Cultipacker rod, DRL-072 1
28 BM0812550DE Bolt M8-1.25x50 w/drilled end 2
29 LNM08125 Self-locking nut M8-1.5 2
30 FW08 Flat washer M8 2
31 CP5x50 Cotter pin, M5x50 2
32 DL8005 Short shaft (w/FW16, LW16, NM1620, CP3x40) 2
33 SPN12x50 Shoulder pin M12 x 50 2
34 LFW12 Large flat washer M12 2