Targa Visionary LCD 19-4 Wide
4
English
• Do not open the monitor’s housing. The high-voltage
components inside the device may produce an electric shock
even after the power cord has been disconnected.
• Do not use the device if the casing is damaged. If this happens,
it must first be examined by authorized service personnel.
• Place the monitor in a clean, dry environment.
• Do not place any recipients containing liquids (beverages,
vases, etc.) onto or next to the device.
• Do not place any fire sources (e.g. burning candles) on or near
the device.
• Disconnect the power supply immediately if liquid gets into the
device and seek the help of a service technician.
• Unplug the device from the mains before cleaning the monitor.
First spray an ammoniac-free detergent onto a cloth to slightly
dampen it, and do not spray it onto the display itself.
• Do not place the monitor next to any magnetic objects, electric
motors, TV sets or transformers.
• Do not place the device near heat sources such as radiators,
ovens or other appliances emitting heat.
• Do not place heavy objects on the cable or power supply.
Position the cables so that they cannot obstruct or catch
anyone.
• The output connectors of the connected devices must be within
easy reach and next to the monitor.
• Always make sure there is sufficient ventilation. Do not place
any device onto the display preventing proper ventilation and
cooling.
To Next Page
Loading...
Need help?
General
