Target 3-2-1 Cube - Step 6: Attach Top Panels

14
1. Align top panel (B) to the unnished edge of divider (D) and side panel (A) with the remaining dowels as shown.
2. Push together to secure dowels. Secure top panel to edges of panel (D) and (A) using four assembly screws.
3. Align screw holes of side panel (B) to the remaining unnished edge of divider (C) and bottom panel (G).
4. Push together to secure dowels. Secure side panel to edges of panel (C) and (G) using four assembly screws.
D
C
E
F
B
B
B
8x
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
G
A
step 6.
(H2) x 8
assembly screw
#10 x 1-1/2 in.