Target 6-Cube - Page 13

13
1. Push vertical divider onto dowels of horizontal divider.
2. Insert long dowels into vertical divider.
3. Attach horizontal divider down over dowels. Be sure to assemble with all nished edges to the front.
4. Secure horiztonal divider with two screws through the side panel.
5. Push top vertical divider onto dowels of horizontal divider.
D
C
D
finished edge
step 5.
(H1) x 2
assembly screw
#10 x 1-1/2 in. athead
(H4) x 2
long dowel