1 2
Low-voltage alert function
When the battery is low, the low power indicator light on the top right corner of the keyboard will flash
to indicate the batteries need to be replaced.
Contents
• Multi-Device Midsize Bluetooth® Keyboard
• User manual
• 2 x AAA battery
System requirements
• Windows
®
10
• macOS
®
• iOS
®
• Android
TM
Establishing pairing
Product Name Operation Frequency(MHz)
Maximum EIRP Power(dBm) (EU)
Working distance
Wireless Keyboard: AKB863 2402-2480MZH 1.0 10M
Installing the battery
1. Remove the battery cover located on the bottom
of the keyboard.
2. Insert the supplied batteries, making sure that
the positive (+) and negative (-) ends of each
battery match the polarity indicators inside the
battery compartment.
1. Turn on the keyboard by sliding the power button to the ON position and the power indicator will
be Green (if the indicator is flashing in Red, please replace the batteries).
2. Switch ON the Bluetooth function of device and turn on Bluetooth search mode.
3. Choose one of the 3 Bluetooth channels
and hold down the chosen key for
3 seconds to enable Bluetooth pairing mode, the Blue indicator light will flash for up to 3 minutes
when the keyboard is in pairing mode.
4. Select “Targus Multi-Device Midsize Bluetooth® Keyboard” in the bluetooth menu on your device.
5. The pairing will start automatically. Press the Bluetooth channel keys
to
switch between devices once multiple devices have been connected.
6. The Targus Multi-Device Midsize Bluetooth® Keyboard is now connected to your device and the
blue light will stop flashing.
Battery compartment
Power button
Targus Multi-Device Midsize Bluetooth® Keyboard Targus Multi-Device Midsize Bluetooth® Keyboard
To Next Page
Loading...
Need help?
General
