WWW.TARTERUSA.COM
STEP SEVEN
STEP NINE
ROUND ‘EM UP! HEAD ‘EM IN!
STEP SIX
STEP EIGHT
Attach main
sweep bow,
which contains
sweep gate and
the secondary
bow, to end of
sweep exit panel.
Spread out
secondary
bow.
Attach first curved
panel to sweep
exit panel with
arch assembly and
secondary bow and
lock with pins.
Attach second
curved panel to
secondary bow and
main sweep bow
and lock with pins.
NOTE: Depending on the direction of the sweep, you may
need to unbolt sweep gate latch assembly and mount to
opposite side of sweep gate. Also the secondary arch will
need to be moved to the other side of the main sweep arch
according to which direction you are setting the system up.
PART #4000011
To Previous Page
Loading...