Tarter CattleMaster 120 - Page 3

STEP TWO
STEP ONE
120 ANGLED TUB ALLEY AND SWEEP
STEP FOUR
STEP THREE
STEP FIVE
Attach the first bow
to Palpation cage,
CattleMaster
®
chute
or your existing chute
using attachment
rods. Note that the
first bow has corral
hardware on one side.
Attach two 10’ straight
alley panels to back of
first bow.
Attach the second
bow, making sure that
adjustment handles
remain on the same
side. This bow has
drop-pin connectors
on both sides.
Attach the
two remaining
10’ straight
alley panels
to the second
bow.
Attach the sweep
exit panel with
arch assembly.
This panel may
be oriented for
right- or left-hand
sweep.
assembly instructions
OSS120