Tascam 12 Owner's Manual Addendum

USB audio mode setting screen changed
Since a USB return channel function has been added, the screen
to set USB audio mode has been changed to the TO PC Screen.
To set the USB audio mode, use the following procedures from
the TO PC Screen.
There is no change to the unit behavior.
1. When the recorder is stopped, select USB AUDIO on the
SYSTEM Screen, and open the USB AUDIO Screen.
For setting procedures, see “Das Menü nutzen (Beispiel)”
in “2 - Die Bedienelemente und ihre Funktionen” of the
Owner’s Manual.
2. Select PC s on the USB AUDIO Screen, and open the TO PC
Screen.
3. Turn the MULTI JOG dial to select the audio to input to the
computer.
Option Meaning
MULTI INPUT
(Voreinstellung)
The inputs of channels 1–6, 7/8 and
9/10 and the output of the MAIN MIX
L/R bus are input to computer USB
channels 1–12.
STEREO MIX
The output of the MAIN MIX L/R bus is
input to computer USB channels 1–2.
4. Press the MULTI JOG dial to conrm the setting.
The USB AUDIO Screen will reopen.
Model 12

Tascam 12 Specifications

General

Channels	12
EQ Bands	3-band
Phantom Power	Yes
Faders	6
Power	AC Adapter