Need help?Do you have a question about the Tascam MH-40B and is the answer not in the manual?
General| Type | Headphone Amplifier |
|---|---|
| Number of Outputs | 4 |
| Channels | 2 |
| Input Impedance | 10 kΩ |
| Frequency Response | 20 Hz - 20 kHz |
| THD+N | 0.01 % |
| Signal-to-Noise Ratio | > 100 dB |
| Power Consumption | 5 W |
| Output Connectors | 1/4" TRS |
| Total Harmonic Distortion | 0.01% |
| Crosstalk | -80 dB |
| Power Supply | AC Adapter |
Conditions to apply to the MH-40B regarding environment like temperature, dust, humidity, and AC power.
Advice on unit differences, retaining manual, and critical safety warnings for fire/shock hazards.
Instruction to record model and serial numbers for future reference and warranty purposes.
Controls unit power and provides status indication via LED.
Adjusts input levels, selects input sources, and chooses mono/stereo operation.
Controls headphone volume and provides four stereo output jacks.
Front panel jacks for direct instrument input and rear terminals for signal routing.
Procedure for changing the unit's voltage setting for general export models.
Instructions for U.K. customers regarding AC plug installation and wiring.
To Next Page
