Quick Reference
Get to Know the StrikeLight Stun Flashlight
Flashlight Button
Charging Port Stun Button
Electrodes
Flashlight Button
Move the ashlight button to the forward (ON) position to turn on the ashlight. Turning the
ashlight on also places the electrodes in standby status. Move the ashlight button to the
rearward (OFF) position to turn o the light and turn o the electrodes.
Stun Button
After turning on the ashlight, press and hold the stun button to make electricity arc at the
electrodes on the front of the device. Press and hold the stun button when applying a drive-
stun to an attacker. The device will arc continually until you release the stun button or the
battery depletes, whichever comes rst.
To Next Page
Loading...