To perform a function test:
1 Point the ashlight in a safe direction and away from your body.
2 Move the ashlight button to the forward (ON) position.
3 Conrm that the light is strong.
4 Press the stun button.
WARNING
View the electrical arc from the top or side of the ashlight. Do not point the ashlight at
your face or have it near your face.
5 Release the stun button.
6 Move the light switch to the rearward (OFF) position.
Flashlight Maintenance and Care
CAUTION
The TASER StrikeLight stun ashlight is a sensitive electronic piece of equipment, and
should be handled with care. Avoid dropping and do not use a device that has visible
damage.
To Next Page
Loading...