EasyManua.ls Logo

Taski aquamat 10.1 - Malfunctions; Troubleshooting Guide; Technical Data; Machine Specifications

Taski aquamat 10.1
191 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
Malfunctions
Technical data
Malfunction Possible causes Troubleshooting Page
Machine without function
Machine is switched off
Switch on the main switch
34
No power supply
Insert the plug into the mains sock-
et
Main cord defect Replace the main cord
Motor does not turn Contact your service partner
No suction or weak suction
Main switch is switched off Switch on the main switch 34
Motor fault Contact your service partner
Dirt in the squeegee Remove the dirt
Cover not correctly put on Position the cover
Seal faulty or not available Replace the seal if necessary
Suction hose broken or fitting loose
Replace suction hose or tighten fit-
ting
Recovery tank full/float has triggered
Turn off the suction motor, empty
and clean tank
Drainage opening/filter blocked
Empty the tank then clean the
drainage opening/filter
34
Little or no water
Pump switched off Switch pump on
Spray nozzles blocked Remove and clean spray nozzles
Spray nozzles removed Attach or replace spray nozzles
Fresh water filter blocked
Empty fresh water tank and clean
filter
35
Machine aquamat 10.1
Working width 24 cm
Spray pump 2 x 32 W
Rated voltage 230-240V~ AC
Frequency 50-60 Hz
Rated power, nominal 900 W
Dimensions (LxWxH) 38x38x60 cm
Main cord length 10 m
Maximum weight of operational machine 12.5 kg
Tank capacity +/- 5% 10 l
Values according to IEC 60335-2-68
Sound pressure level LpA 70 dB(A)
Uncertainty KpA 2.5 dB(A)
Vibration <2.5 m/s2
Uncertainty K 0.25 m/s2
Splash water guard IPX4
Protection class II
EN

Table of Contents

Related product manuals