27
Squeegee adjustment
If the squeegee drys unevenly drys on a level floor the squeegee must to be
adjusted.
Insufficient suction result on the outer end of the squeegee:
Insufficient suction result on the middle part of the squeegee:
t Turn off the machine (main switch).
t Loose the hexagon bolt (6 mm spanner) of the
squeegee adjustment.
t Adjust the squeegee according to the drawing on the
right side.
t Adjust according to the drawing on the right side:
t Adjust according to the drawing on the right side:
A
A
A
A
To Next Page
Loading...
Need help?
General