30
Safety automation of Brush lift F8:
Recharge batteries
Regularly check the electrical cabling for damage or ageing.
Please follow the instructions of the battery manufacturer.
t Press this button to reset the breakdown on the brush
lowering.
F8 Fuse ratings: co 1400/1500/1600/1700/1800
F8= Safety automation Brush lowering
(only co 1500/1700)
t Check whether the machine is turned off by turning of
ignition key.
t Open the machine hood.
Caution:
Battery compartment must be open during charging.
t Open the battery cover.
t Disconnect battery plug with external battery charger.
t Connect battery plug with the external battery charger.
To Next Page
Loading...
