17
Soiled solution pump (Option)
Empty into higher elevation:
Drain the recovery tank / fresh water tank
Recycling filter (optional):
t Lift the fresh water tank (diaphragm sack).
t Lay the fresh water tank (diaphragm sack) in the recovery tank.
Cleaning solution leakage.
t Remove the empty fresh water tank (diaphragm sack) from the recovery
tank.
t Pull out the key and operate the parking brake (see Parking brake‘ Page 9).
t Conduct the emptying hose to a drain sink or a bucket.
t Press the soiled solution pump button.
It will only be emptied up to the standpipe in the soiled
solution tank.
t Pull out the key and operate the parking brake (see Parking brake‘ Page 9).
t Fold the driver seat forward and open the tank cover.
t Unscrew the tank lid (page 6).
If necessary with the special tank tool.
t Clean the recovery tank thoroughly.
t Screw down the tank lid with both hands.
t Thoroughly flush out the fresh water tank (diaphragm sack) with fresh water.
t Refit the fresh water tank (diaphragm sack) onto the equipment.
t Remove dirt from tube.
t Brush the suction filter with a soft brush or remove the fluff with a cloth.p
t Take out recycling filter after every use and clean it if necessary.
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
To Next Page
Loading...
Need help?
General