18
Remove and clean the squeegee
Removing and cleaning the squeegee
Caution:
Clogged filters reduce the flow of the cleaning solution. As a consequence
you may damage the floor coating.
t Place the recycling filter in the fresh water tank (diaphragm sack).
t Pull out the key and operate the parking brake (see Parking brake‘ Page 9).
t Lift the tool lightly.
t Turn the left tool clockwise and the right tool counter
clockwise out the lock.
t Clean the tools under running water.
t Pull out the key and operate the parking brake (see Parking brake‘ Page 9).
t Remove the suction hose.
t Loosen the fixation knobs on the squeegee.
t Disassemble the suction nozzle and tighten the fixation
screw.
t Clean the squeegee under running water with a brush.
t Hang the suction nozzle onto the nozzle-/tube holder.
Clean blades produce streak-free results!
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
To Next Page
Loading...
Need help?
General