Taski ergodisc 165 User Manual

Achtung: Das Gerät darf nicht in Betrieb genommen werden, bevor die Gebrauchsanweisung gelesen und verstanden ist. Die Gebrauchsanweisung ist immer
griffbereit bei der Maschine oder dem Maschinenstandort aufzubewahren.
Attention: L‘appareil ne doit pas être mis en service avant d‘avoir lu et assimilé le manuel d‘utilisation.
Le manuel d‘utilisation doit rester accessible en permanence à proximité de l‘appareil ou bien être conservé sur le même site que lui.
Warning: Do not operate this appliance before reading and understanding these instructions. Always keep the instructions attached to the appliance or readily
available at the appliance storage site.
ergodisc
165/175/200/238/
300/400/438/duo
Gebrauchsanweisung
Manuel d‘utilisation
Instructions for use

Taski ergodisc 165 Specifications

General

Machine Type	Single Disc
Speed	165 rpm
Power Consumption	1100 W
Cable Length	15 m
Approvals	CE
Voltage	230 V
Protection Class	I
Brush/Pad Diameter	43 cm / 17 in

Summary

Appliance Description

1.1 Technical Data

Specifications including voltage, frequency, power rating, and protection class for various models.

Safety Instructions

2.1 Warnings

Crucial warnings for operation, electrical safety, storage, and general hazards.

Electrical Connections

Preparation for Operation/Operation

5.1 Attaching Accessories & 5.2 Operation

5.3 Working Method

Maintenance

Cleaning and Airflow Checks

Minor Malfunctions

Troubleshooting common issues like no power, accessory not rotating, or fuse blowing.

Repairs and Servicing

7.1 Repairs

Guidelines for authorized repairs and the importance of using qualified technicians.

7.2 Service Intervals

Defines mandatory annual or 250-hour service intervals for safety and reliability.