Taski ergodisc 175 - User Manual

Achtung: Das Gerät darf nicht in Betrieb genommen werden, bevor die Gebrauchsanweisung gelesen und verstanden ist. Die Gebrauchsanweisung ist immer
griffbereit bei der Maschine oder dem Maschinenstandort aufzubewahren.
Attention: L‘appareil ne doit pas être mis en service avant d‘avoir lu et assimilé le manuel d‘utilisation.
Le manuel d‘utilisation doit rester accessible en permanence à proximité de l‘appareil ou bien être conservé sur le même site que lui.
Warning: Do not operate this appliance before reading and understanding these instructions. Always keep the instructions attached to the appliance or readily
available at the appliance storage site.
ergodisc
165/175/200/238/
300/400/438/duo
Gebrauchsanweisung
Manuel d‘utilisation
Instructions for use

Taski ergodisc 175 Specifications

General

Speed	175 rpm
Cable Length	15 m
Brush/Pad Diameter	43 cm
Voltage	230 V
Pad Holder Type	Hook and loop

Summary

Product Overview and Specifications

Safety Instructions and Warnings

General Safety Warnings and Precautions

Provides essential safety instructions for operation, handling, and storage.

Noise Emissions and Vibration Levels

Electrical Connection and Grounding

Grounding Instructions for Safe Operation

Explains electrical connection requirements and grounding for safe operation.

Machine Design, Components, and Accessories

Recommended Products

Operation and Setup Procedures

Attaching and Securing Work Tools

Machine Operation and Handling

Guidance on operating the machine, including handle adjustments and cord usage.

Working Methods for Applications

Maintenance and Troubleshooting

Troubleshooting Minor Malfunctions

Lists common problems, their causes, and solutions for machine issues.

Repairs and Servicing

Authorized Repair Procedures

Details requirements for machine repairs and who is authorized to perform them.

Scheduled Maintenance Service Intervals