19
tr sl se pt no nl it hu hr fr fi es en el de da cz
EU Declaration of Conformity
We
TechTronic Appliances (HK) LTD
18/F,CDW Building , 388 Castle Peak Road , Tsuen Wan ,Hong Kong
hereby declare that the product described below both in this basic design and
construction and in the version marketed by us conforms to the relevant safety-
and health-related requirements of the appropriate EU Directive.
This declaration shall cease to be valid if modifications are made to the product
without our approval.
Applicable EU Directives:
Machine Directive (73/23/EEC) in version
EEC EMC (Electro Magnetic Compatibility) (89/336/EEC) in version
98/13/EEC
Harmonised standards applied:
EN 60 335-1:2000+A1+A11/EN 60335-2-69:2003+A1/EN 50366:2003/
EN 55014-1:2000+A1+A2/EN 55014-2:1997+A1/EN 61000-3-2:2000/
EN 61000-3-3:1995+A1
It is ensured throug internal measures that series-production units conform at
all times to the requirements of current EU Directives and relevant standards
The signatories act on behalf of company management and with full power of
attorney.
Overview
1
Fastener catch
2
Socket for power brush (max.150W)
3
Cable rewind
4
Transport handle
5
Vacuum lid
6
ON/OFF switch
7
Cord support
8
Power supply socket for power supply cord
9
Parking position for the suction tube and squeegee
10
Accessories holder (only vento 15)
11
Canister
12
Unlocking device for suction hose
13
Hose connector
14
Universal dust squeegee
15
Dusting brush nozzle (standard accessory: only vento 15)
16
Crevice nozzle (standard accessory: only vento 15)
17
Suction tube
18
Hose tube
19
Suction hose
Preparation for operation/Operation
Beginning work
End of operation
If the suction perfromance is inadequate, replace the dust bag and service
the filter as described below:
Product: Vacuum cleaner
Name/Model type: vento 8 (220-240V~/50-60Hz/900W)
Name/Model type: vento 15 (220-240V~/50-60Hz/1000W)
without power brush
vento 15 (220-240V~/50-60Hz/1150W)
with power brush
• See the leaflet included in the packaging.
• Insert the dust bag as described in the pictogram on the dust bag.
• Insert the basket, the arrow at the top must point towards the hose
connector.
• Place the ridge of the vacuum lid (2) into the
guide provided on the canister (1), then press
down until you hear the fastener catch click into
place.
• Assemble the suction accessories.
• Insert the suction hose into the hose connector until it locks in.
• Plug the power supply cord into the mains socket.
• Switch the machine on (ON/OFF).
A bleed hole cover with which the suction force can be regulated is mounted
on the tube bend.
The supplied accessory (for vento 15 only) can be attached to the tube or the
hose tube.
• Switch the machine off (ON/OFF) and pull the power supply cord out of the
mains socket.
• Wipe down the machine with a damp cloth.
• Wind up the power supply cord from the vacuum lid starting at the cable
rewind.
Caution:
Never clean the machine with high water pressure or a water
hose.
The ingress of water into the machine might cause considerable
damage to mechanical or electrical parts.
Wait a moment for dust to settle before removing the dust bag.
• Press down the fastener catch (1) and lift off the
vacuum lid (2).
• Take out the basket, check if the cloth filter is
dirty (basket), clean if necessary.
• Remove the dust bag from the hose connector and dispose of it according
to your national regulations.
• Insert the dust bag as described in the pictogram on the dust bag.
Lightly soiled cloth filter.
• Brush off or using another vacuum cleaner, suck off the dirt.
Heavily soiled cloth filter.
• Wash the cloth filter in the washing machine (max. 30°C/86°F).
• Rest the damp cloth filter on the basket (so it adopts the right shape) and
leave to air dry.
The cloth filter may not be put in the tumble drier!
Caution:
The machine may only be operated with a dry and functional filter
cloth!
• Insert the basket, the arrow at the top must point towards the hose
connector.
Heavy soiling of the filter disc
• Turn the vacuum lid round, and replace the filter
disc with a new one.
The blue side of the filter disc must be visible.
To Next Page
Loading...
Need help?
General
