What causes hard shifting in my TATA Motors nano emax?
If you experience hard shifting in your TATA Motors Automobile, it could be due to inadequate lubricant, so replenish it. Check if the clutch pedal travel is inadequate and adjust it. If the clutch disc is distorted or broken, replace it. Also, damaged clutch pressure plate needs replacement of the clutch cover or disc.
Why is my TATA Motors Automobile brake pulling to one side?
If you notice brake pulling to one side in your TATA Motors Automobile, it could be due to oil on the brake lining, which needs cleaning. Another reason is one side shoe/pad worn on both wheels, so get the shoe/pad replaced. Check if the brake anchor plate is loose and tighten the bolts. A clogged brake pipe on one side needs cleaning. Lastly, if one side automatic adjuster is not functioning, rectify or replace it.
How to fix engine not cranking in TATA Motors nano emax?
If the engine of your TATA Motors Automobile is not cranking, it might be due to a dead battery or loose electrical connections. In this case, you should get the battery checked or replaced. Also, make sure that the receptacle cap (fuel filler valve cap) is tightened properly, ensuring alignment on the receptacle. Jump starting the car with another battery or tightening the connections properly might also help. Consider checking the spark plug, cleaning it, and replacing it if necessary.
Why does my TATA Motors nano emax not accelerate?
If your TATA Motors Automobile does not accelerate, it could be due to a broken accelerator cable, which needs replacement. Another possible cause is a choked fuel filter, which should also be replaced.
What causes abnormal noise from the front end of my TATA Motors nano emax Automobile?
If you notice an abnormal noise from the front end of your TATA Motors Automobile, it could be due to damaged struts or mounting, which should be repaired. Worn suspension arm bushings should be replaced. Ensure that the wheel bolts and suspension bolts or nuts are tightened. Excessive hub play requires bearing replacement.
Why is the clutch slipping in my TATA Motors Automobile?
If your TATA Motors Automobile experiences clutch slipping, adjust the pedal travel if it's improper. If the clutch cable is rusted, replace it. If there is oil on the clutch disc, clean or replace the disc at an Authorized Service outlet.
Why is the steering hard in my TATA Motors nano emax Automobile?
If you experience hard steering in your TATA Motors Automobile (mechanical), it could be due to disturbed wheel alignment, so check and adjust it. The rack and pinion might need adjustment or replacement if necessary. Ensure that the tyre pressure is at the correct value. Also, check for any grabbing of linkages and rectify it.
What does it mean if the MIL/SIL lights are ON/blinking in my TATA Motors nano emax Automobile?
If the MIL or SIL lights are continuously ON or blinking in your TATA Motors Automobile, even after starting the engine, it indicates that some faults have been detected by the ECU. In this case, get the vehicle checked and rectified at a TATA authorized service center.
Why does my TATA Motors nano emax Automobile engine overheat?
If your TATA Motors Automobile engine overheats, it could be due to several reasons. The brakes might be binding, so get the defect rectified. The electric fan might not be working, so get that fixed as well. Check if the radiator fins are clogged and clean them. Also, the thermostat might be defective, so have it rectified. Finally, ensure that the coolant level is adequate by topping it up if low.
What should I do if my TATA Motors Automobile engine cranks but doesn't start in CNG Mode?
If the engine of your TATA Motors Automobile cranks but does not start in CNG mode, first ensure that you have enough CNG by refilling it. If the issue persists, the CNG filter or fuel lines might be choked; in this case, get the CNG filter replaced at a TATA authorized service center. Other potential causes include a safety solenoid not operating or an error logged in the ECU; for these issues, contact a TATA authorized service center.
General| Brand | TATA Motors |
|---|---|
| Model | nano emax |
| Category | Automobile |
| Language | English |
Explains the meaning of CAUTION, NOTICE, and WARNING messages in the manual.
Details the warranty period, coverage, exclusions, and conditions for the vehicle.
Details the engine specifications and fuel efficiency of the Tata Nano.
Highlights the car's safety features and compliance with regulations.
Explains the meaning and operation of various warning and indicator lights.
Covers the operation of keys, locking, and unlocking vehicle doors.
Provides instructions on how to use seat belts and safety precautions.
Lists essential checks and adjustments before starting the vehicle.
Covers safety checks for various components and safe driving practices.
Explains procedures for gear shifting, braking, and parking the vehicle.
Details the procedure for changing a flat tyre, including safety and precautions.
Provides instructions for starting the engine using jump leads from another vehicle.
Offers guidance on common problems and their possible causes and solutions.
Details the location, function, and replacement of fuses and relays in the vehicle.
Provides guidelines for washing, polishing, and cleaning the vehicle's exterior and interior.
Explains how to check and top up brake fluid and windshield washer fluid.
Guides on checking and topping up engine oil and coolant levels.
Explains the cleaning/replacement of the air filter and specifications for spark plugs.
Covers tyre inflation, condition checks, recommended pressures, and repair advice.
Provides instructions for battery maintenance, corrosion checks, and replacement.
Lists recommended oils, coolants, and other fluids for vehicle performance.
Provides detailed specifications for the engine, clutch, transaxle, and other vehicle systems.
To Next Page