tatsuno CNG050 - Dispenser Parts Marking Conventions

CNGdispensersTATSUNOEUROPE‐QuickUserGuide 
7
1.3. DISPENSERPARTSMARKINGCONVENTIONS

Figure1illustratestheTATSUNOEUROPEdispensermarkingandsortingsystem.Indispenserswhereitis
notcleariftheleftorrightsideofthedispenserconcerns(SUNNYEXEUROandSHARKECONOMY),the
locationofthenameplatewhichisalwaysclosesttoproductNo.1andnozzleNo.1(1A)isdecisive.Inthe
caseofadouble‐sideddispenser,therightsideofthedispenserisalsoreferredtoassideAandtheleft
sideisreferredtoassideB.Foraone‐sidedleftorone‐sidedrightdispenser,itisalwaysonlysideA.



Figure1‐Dispensermarkingsystemwiththerecommendedarrivaldirection
