To Next PageTo Next Page
Need help?Do you have a question about the tau ARM200 Series and is the answer not in the manual?
Key safety rules for installers, covering product use, handling, and installation compliance.
Details and identification of the main components of the actuator unit.
Provides the physical dimensions of the actuator unit.
Wiring diagram and cable specifications for the standard ARM200 system.
Wiring diagram and cable specifications for the ARM200BENC system.
Wiring details for the ARM200 230 Vac model, including terminal connections.
Wiring details for the ARM200BENC 12 Vdc model, including terminal connections.
Schedule and tasks for regular maintenance of the gate and automation system.
Procedures for handling major repairs or component failures.
Explains the ARM200 swing gate automation system, its features, and irreversible nature.
Procedure for manual operation in case of power failure or malfunction.
Guidance on routine and extraordinary maintenance for the automation system.
Checks the connection and function of the safety circuit breaker.
Verifies the setting and proper functioning of the electronic clutch.
Checks the connection and operation of safety devices.
Verifies the connection and efficiency of the earth socket.
Checks the function of the manual release device.
Checks the operation of limit switches.
Checks the connection and operation of accessories.
Assesses the condition of the gearmotor's fixing.
Checks the condition of the fastening pins.
Assesses the wear of the front and rear fittings.
Evaluates the overall condition of the gate.
Space for the fitter to sign off on maintenance checks.
Space for the user to acknowledge maintenance completion.
List of spare parts for the ARM200 series 230 Vac models.
List of spare parts for the ARM200BENC series 12 Vdc models.
Key safety rules for installers, covering product use, handling, and installation compliance.
Details and identification of the main components of the actuator unit.
Provides the physical dimensions of the actuator unit.
Wiring diagram and cable specifications for the standard ARM200 system.
Wiring diagram and cable specifications for the ARM200BENC system.
Wiring details for the ARM200 230 Vac model, including terminal connections.
Wiring details for the ARM200BENC 12 Vdc model, including terminal connections.
Schedule and tasks for regular maintenance of the gate and automation system.
Procedures for handling major repairs or component failures.
Explains the ARM200 swing gate automation system, its features, and irreversible nature.
Procedure for manual operation in case of power failure or malfunction.
Guidance on routine and extraordinary maintenance for the automation system.
Checks the connection and function of the safety circuit breaker.
Verifies the setting and proper functioning of the electronic clutch.
Checks the connection and operation of safety devices.
Verifies the connection and efficiency of the earth socket.
Checks the function of the manual release device.
Checks the operation of limit switches.
Checks the connection and operation of accessories.
Assesses the condition of the gearmotor's fixing.
Checks the condition of the fastening pins.
Assesses the wear of the front and rear fittings.
Evaluates the overall condition of the gate.
Space for the fitter to sign off on maintenance checks.
Space for the user to acknowledge maintenance completion.
List of spare parts for the ARM200 series 230 Vac models.
List of spare parts for the ARM200BENC series 12 Vdc models.
General| Motor voltage | 24V DC |
|---|---|
| Max motor power | 200W |
| Operating temperature | -20°C to +55°C |
| Protection class | IP44 |
| Limit switch input | Yes |
| Encoder input | Yes |
| Power | 200W |
| Maximum Gate Weight | 400 kg |
| Maximum Gate Width | 4 m |
| Protection Rating | IP44 |
